Description: Ink-jet printing of light & dark color thermal transfer paper, applicable in any material cotton t-shirt or cotton fabric. Our T-shirt Transfer paper is AW quality, it can not fade washing more than 70 times.
Brand: SKYIMAGE
Size: A4(210mmx297mm) & A3(297mm×420mm)
High quality Heat T-shirt transfer paper A4/A3 size for inkjet printer on 100% cotton t-shirt/ garment fabric
Paper description:
Size: |
A4 (210x297mm) or A3(297mm×420mm) |
Pack: |
20sheet/pack |
Printer: |
Epson. Canon and other inkjet printers |
Ink: |
Dye Ink and Pigment Ink |
Base Paper: |
White Paper |
Weight / m2: |
170gsm |
Temperature: |
180-220 Degrees |
Time: |
20-30s |
Transfer Rate: |
90% |
Material: |
Pure Cotton |
Paper display:
Other paper size:
Sheet size: 8.5”x11”, 11”x17”, 13”x19”
Roll: 17”, 24”, 36”, 44”
Charactistic of t-shirt transfer paper:
INSTRUCTIONS:
1) Print on the white side of the paper.
2) Mirror/flip your before you print.
3) Check printer settings and set to single sheet feeding.
4) We recommend using the bypass tray for single-sheet feeding.
For best results, trim away unprinted areas of the transfer as close to image as possible. We recommend using an image with rounded corners to avoid corner lift-off after washing.
Note:
TRANSFERRING- HOUSE-HOLD IRON ON APPLICATION
1) Choose a smooth, hard surface at waist level or below. You must put all of your weight into the ironing, push down as hard as you can. That is why you do not use an ironing board.
2) Preheat the iron to the highest cotton setting for 3 minutes - do not use warm. Do not use steam (empty all the Water).
3) Place a pillowcase on the hard surface and iron to remove any wrinkles.
4) Place the garment on the center of the pillowcase and iron to ensure flatness.
5) Place the transfer printed side facing down in the desired position on the garment
6) Step press with firm pressure, slowly along each side of the image. Place the iron in one spot and press that spot. Then more the iron to the next spot. 7) Hold each press for 45 seconds
8) Continue to step press over the entire image. Ensure all edges and corners are firmly pressed. Total ironing time should be 5 to 6 minutes for 8.5 x 11 size image.
9) When all areas are adhered do a quick pass with the iron to heat up the whole transfer. Peel the transfer immediately while it is still hot.
About Our Company
We have complete confidence to offer you high quality, to satisfy well with your requirements
1.10 years experience of printer consumables production in China.
2. Top quality material we import from Germany
3. Strict quality controlling and professional QC inspecting before shipping
4. Factory directly supply, all made by ourselves, save much cost for you.
5. High quality and best services
6. OEM/ODM orders are acceptable